One piece design for easier installation

One Piece Design For Easier Installation

Traditional sealing solutions cannot provide adequate safety at elevated application levels. The integrated spiral spring in the S seal ensures high pressure resilience, excellent resistance to rolling and bunching, and simple fitting. A standard range designed to suit AS668B O-Ring housings is available to be retrofitted into original O-Ring grooves in three standard lengths.

Freudenberg Oil & Gas Technologies Spring Seals are mostly used in stab and static applications for high cyclic pressure and temperature peaks of up to 15,000 psi and 210° C (410° F) or higher, depending on housing design and material choice. Used for many oil and gas applications like within wellheads, downhole tools and surface pressure control equipment, Freudenberg Oil & Gas Technologies’ Spring Seals are supplied in a wide range of materials. Custom sized designs are also available.

Freudenberg Oil & Gas Technologies’ 400 series long axial groove length 5.00” and 13.00” S Seals were successfully pressure/temperature cycle tested in accordance with API-6A and ISO 10423, Made in our proprietary Gazguard material, the seals were qualified to 15,000 psi from 0°F (-18°C) to 410°F (210°C). Test certification is available for download to registered users.


Product Highlights

Product Highlights

  • Alternative engineered seal design to using T Seals or O-Rings, traditional S Seals utilize metal spring for supporting sealing of various extrusion gaps.
  • Designed as an engineered replacement for T Seals and O-Rings
  • Primarily used in static services but could be used in some dynamic services with PEEK springs
  • One piece design for easier installation into glands vs. multiple component seals
  • 400 series long axial groove length 5.00” and 13.00”
    S Seals were successfully pressure/temperature cycle tested in accordance with ISO 10423,
    Annex F.1.11 (Valve performance class PR2)

Materials

Spring seals from Freudenberg Oil & Gas Technologies are available in commercial grades like NBR, HNBR, FKM and our high performance Gazguard ® grades, engineered to offer superior performance in demanding applications, Norsok M-710 RGD, Norsok M-710 sour gas and ISO 10423 (API 6A) chemical ageing immersion and fixture testing and ISO 10423 F.1.11 pressure and thermal cycling testing.

  • Materials
  • Downloads

Custom and standard solutions are available in a wide range of high-performance proprietary and standard elastomer recipes, including:

Available downloads:

  • Gazguard 728 FF/HH Certification

    English QMS-F30 Rev.5 locked DOWNLOAD
  • S Seal PR2 Qualification 0F - 250F

    English C?00001 Rev.1.2 locked DOWNLOAD
  • S-Seals Brochure

    English V-2-2016 available DOWNLOAD

Materials

Custom and standard solutions are available in a wide range of high-performance proprietary and standard elastomer recipes, including:

Downloads

Available downloads:

  • Gazguard 728 FF/HH Certification

    English QMS-F30 Rev.5 locked DOWNLOAD
  • S Seal PR2 Qualification 0F - 250F

    English C?00001 Rev.1.2 locked DOWNLOAD
  • S-Seals Brochure

    English V-2-2016 available DOWNLOAD

Knowledge Center

Looking for more information on our
products, services and innovation?

Click Here

More Information?

We are happy to help you further.
Contact one of our locations.

Click Here