Vector Techlok® Accessories


Intro - Techlok Accessories

A complete product range

Vector Techlok® clamp connectors are highly versatile and can be used in many diverse applications.

In addition there are several other products completing the Vector Techlok® range. Some examples of them you may find on this page but we also offer an individual design service for special applications.


Hubbed Tees & Elbows

Hubbed Tees & Elbows

A range of hubbed elbows, tees and cross pieces are available to help facilitate compact piping layouts.

Components are manufactured in forged steel with reinforced bend sections.


Orifice connectors

Orifice connectors

Vector Techlok® Metering (FE) orifice connectors can either be supplied with ‘D - D/2’ or ‘flange’ tappings.

In either case the branch tapping can be integral in the form of a female tapping (threaded, socket weld or butt weld) or as a hub/flange.

FO&GT also offers a range of Restriction Orifice (RO) connectors. Sizes offered range up to 30” and pressures in excess of 20,000psi.


Weld-o-hubs, Sweep-o-hubs and Tees

Weld-o-hubs, Sweep-o-hubs and Tees

Weld-O-Hubs, Sweep-O-Hubs and Tees are a standard range of Freudenberg Oil & Gas Technologies (FO&GT) products in their own right and are incorporated within our standard product brochure.


Pulling head

Pulling head

Pulling heads are adapted from blind hubs to function as part of a standard Vector Techlok® clamp connection.

Our pulling heads are designed using Finite Element Analysis (FEA) to meet customers’ application requirements and every pulling head is load tested prior to release


Adapter Spool

Adapter Spool

Available to connect different connector types and sizes. For example : Techlok®- Techlok®, Techlok®-ANSI and Techlok®-API.

Transition spools can be supplied in various lengths to suit client in-situ applications. Hydrostatic pressure testing of spools can be undertaken upon request.


Thermowells and Quills

Thermowells and Quills

Thermowells and sample/ injection quills can be supplied with either a parallel or tapered shaft of any length in any material grade and are used as an integral part of Weld-o-hub and Sweep-o-hub assemblies.

Calculations can be supplied in accordance with PTC19.3(2016). Thermocouple tappings can be supplied in any format.


Slimline clamps

Slimline clamps

Available as an option to fit all hub sizes. The design allows for a reduced diameter envelope and also specialised materials, due to fully machined construction.

Used in conjunction with “Pulling blinds” and also electrically insulated connectors.

Read more


Nozzles

Nozzles

Vector Techlok® Nozzles are available for use with pressure vessel construction to provide a convenient system for connecting pipework.

The nozzle is used for “set through” construction providing reinforcement for the pressure vessel wall.

Nozzles are manufactured from forged steel and are available in all sizes and materials to suit client needs.


Spade/Spacer

Spade/Spacer

Components are available for all hub / clamp sizes. For smaller sizes spade/spacers can be fabricated into “spectacle blinds”, however, for most applications the spade and spacer remain as separate components.

The length of the Spade/Spacer will be slightly greater than the width to allow two clamps positioned side by side.


Tapped blind

Tapped blind

Available to connect different connector types and sizes.

For example : Techlok®- Techlok®, Techlok®-ANSI and Techlok®-API.

Transition spools can be supplied in various lengths to suit client in-situ applications. Hydrostatic pressure testing of spools can be undertaken upon request.

Knowledge Center

Looking for more information on our
products, services and innovation?

Click Here

More Information?

We are happy to help you further.
Contact one of our locations.

Click Here